OSHA 29 CFR 1910 – Safety and Health Regulations for General

PART 1910—SAFETY AND HEALTH REGULATIONS FOR GENERAL

Subpart A—General

Sec.
1910.1    Purpose and scope.
1910.2    Definitions.
1910.3    Petitions for the issuance, amendment, or repeal of a standard.
1910.4    Amendments to this part.
1910.5    Applicability of standards.
1910.6    Incorporation by reference.
1910.7    Definition and requirements for a nationally recognized testing laboratory.
1910.8    OMB control numbers under the Paperwork Reduction Act.
1910.9    Compliance duties owed to each employee.

Subpart B—Adoption and Extension of Established Federal Standards

1910.11    Scope and purpose.
1910.12    Construction work.
1910.15    Shipyard employment.
1910.16    Longshoring and marine terminals.
1910.17    Effective dates.
1910.18    Changes in established Federal standards.
1910.19    Special provisions for air contaminants.

Subpart C [Reserved]

Subpart D—Walking-Working Surfaces

1910.21    Scope and definitions.
1910.22    General requirements.
1910.23    Ladders.
1910.24    Step bolts and manhole steps.
1910.25    Stairways.
1910.26    Dockboards.
1910.27    Scaffolds and rope descent systems.
1910.28    Duty to have fall protection and falling object protection.
1910.29    Fall protection systems and falling object protection—criteria and practices.
1910.30    Training requirements.

Subpart E—Exit Routes and Emergency Planning

1910.33    Table of contents.
1910.34    Coverage and definitions.
1910.35    Compliance with alternate exit-route codes.
1910.36    Design and construction requirements for exit routes.
1910.37    Maintenance, safeguards, and operational features for exit routes.
1910.38    Emergency action plans.
1910.39    Fire prevention plans.
Appendix    to Subpart E of Part 1910—Exit Routes, Emergency Action Plans, and Fire Prevention Plans

Subpart F—Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms

1910.66    Powered platforms for building maintenance.
1910.67    Vehicle-mounted elevating and rotating work platforms.
1910.68    Manlifts.

Subpart G—Occupational Health and Environmental Control

1910.94    Ventilation.
1910.95    Occupational noise exposure.
1910.97    Nonionizing radiation.
1910.98    Effective dates.

Subpart H—Hazardous Materials

1910.101    Compressed gases (general requirements).
1910.102    Acetylene.
1910.103    Hydrogen.
1910.104    Oxygen.
1910.105    Nitrous oxide.
1910.106    Flammable liquids.
1910.107    Spray finishing using flammable and combustible materials.
1910.108    [Reserved]
1910.109    Explosives and blasting agents.
1910.110    Storage and handling of liquefied petroleum gases.
1910.111    Storage and handling of anhydrous ammonia.
1910.112-1910.113    [Reserved]
1910.119    Process safety management of highly hazardous chemicals.
1910.120    Hazardous waste operations and emergency response.
1910.121    [Reserved]

Dipping and Coating Operations

1910.122    Table of contents.
1910.123    Dipping and coating operations: Coverage and definitions.
1910.124    General requirements for dipping and coating operations.
1910.125    Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C).
1910.126    Additional requirements for special dipping and coating operations.

Subpart I—Personal Protective Equipment

1910.132    General requirements.
1910.133    Eye and face protection.
1910.134    Respiratory protection.
1910.135    Head protection.
1910.136    Foot protection.
1910.137    Electrical protective equipment.
1910.138    Hand protection.
1910.139    [Reserved]
1910.140    Personal fall protection systems.
Appendix A to Subpart I of Part 1910—References for Further Information (Non-mandatory)
Appendix B to Subpart I of Part 1910—Nonmandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection
Appendix C to Subpart I of Part 1910—Personal Fall Protection Systems Non-Mandatory Guidelines
Appendix D to Subpart I of Part 1910—Test Methods and Procedures for Personal Fall Protection Systems Non-Mandatory Guidelines

Subpart J—General Environmental Controls

1910.141    Sanitation.
1910.142    Temporary labor camps.
1910.143    Nonwater carriage disposal systems. [Reserved]
1910.144    Safety color code for marking physical hazards.
1910.145    Specifications for accident prevention signs and tags.
1910.146    Permit-required confined spaces.
1910.147    The control of hazardous energy (lockout/tagout).

Subpart K—Medical and First Aid

1910.151    Medical services and first aid.
1910.152    [Reserved]

Subpart L—Fire Protection

1910.155    Scope, application and definitions applicable to this subpart.
1910.156    Fire brigades.

Portable Fire Suppression Equipment

1910.157    Portable fire extinguishers.
1910.158    Standpipe and hose systems.

Fixed Fire Suppression Equipment

1910.159    Automatic sprinkler systems.
1910.160    Fixed extinguishing systems, general.
1910.161    Fixed extinguishing systems, dry chemical.
1910.162    Fixed extinguishing systems, gaseous agent.
1910.163    Fixed extinguishing systems, water spray and foam.

Other Fire Protection Systems

1910.164    Fire detection systems.
1910.165    Employee alarm systems.
Appendices to Subpart L of Part 1910—Note
Appendix A to Subpart L of Part 1910—Fire Protection
Appendix B to Subpart L of Part 1910—National Consensus Standards
Appendix C to Subpart L of Part 1910—Fire Protection References For Further Information
Appendix D to Subpart L of Part 1910—Availability of Publications Incorporated by Reference in Section 1910.156 Fire Brigades
Appendix E to Subpart L of Part 1910—Test Methods for Protective Clothing

Subpart M—Compressed Gas and Compressed Air Equipment

1910.166-1910.168    [Reserved]
1910.169    Air receivers.

Subpart N—Materials Handling and Storage

1910.176    Handling materials—general.
1910.177    Servicing multi-piece and single piece rim wheels.
1910.178    Powered industrial trucks.
1910.179    Overhead and gantry cranes.
1910.180    Crawler locomotive and truck cranes.
1910.181    Derricks.
1910.183    Helicopters.
1910.184    Slings.

Subpart O—Machinery and Machine Guarding

1910.211    Definitions.
1910.212    General requirements for all machines.
1910.213    Woodworking machinery requirements.
1910.214    Cooperage machinery. [Reserved]
1910.215    Abrasive wheel machinery.
1910.216    Mills and calenders in the rubber and plastics industries.
1910.217    Mechanical power presses.
1910.218    Forging machines.
1910.219    Mechanical power-transmission apparatus.

Subpart P—Hand and Portable Powered Tools and Other Hand-Held Equipment

1910.241    Definitions.
1910.242    Hand and portable powered tools and equipment, general.
1910.243    Guarding of portable powered tools.
1910.244    Other portable tools and equipment.

Subpart Q—Welding, Cutting and Brazing

1910.251    Definitions.
1910.252    General requirements.
1910.253    Oxygen-fuel gas welding and cutting.
1910.254    Arc welding and cutting.
1910.255    Resistance welding.

Subpart R—Special Industries

1910.261    Pulp, paper, and paperboard mills.
1910.262    Textiles.
1910.263    Bakery equipment.
1910.264    Laundry machinery and operations.
1910.265    Sawmills.
1910.266    Logging operations.
1910.268    Telecommunications.
1910.269    Electric power generation, transmission, and distribution.
1910.272    Grain handling facilities.

Subpart S—Electrical

General

1910.301    Introduction.

Design Safety Standards for Electrical Systems

1910.302    Electric utilization systems.
1910.303    General.
1910.304    Wiring design and protection.
1910.305    Wiring methods, components, and equipment for general use.
1910.306    Specific purpose equipment and installations.
1910.307    Hazardous (classified) locations.
1910.308    Special systems.
1910.309-1910.330    [Reserved]

Safety-Related Work Practices

1910.331    Scope.
1910.332    Training.
1910.333    Selection and use of work practices.
1910.334    Use of equipment.
1910.335    Safeguards for personnel protection.
1910.336-1910.360    [Reserved]

Safety-Related Maintenance Requirements

1910.361-1910.380    [Reserved]

Safety Requirements for Special Equipment

1910.381-1910.398    [Reserved]

Definitions

1910.399    Definitions applicable to this subpart.
Appendix A to Subpart S of Part 1910— References for Further Information

Subpart T—Commercial Diving Operations

General

1910.401    Scope and application.
1910.402    Definitions.

Personnel Requirements

1910.410    Qualifications of dive team.

General Operations Procedures

1910.420    Safe practices manual.
1910.421    Pre-dive procedures.
1910.422    Procedures during dive.
1910.423    Post-dive procedures.

Specific Operations Procedures

1910.424    SCUBA diving.
1910.425    Surface-supplied air diving.
1910.426    Mixed-gas diving.
1910.427    Liveboating.

Equipment Procedures and Requirements

1910.430    Equipment.

Recordkeeping

1910.440    Recordkeeping requirements.
Appendix A to Subpart T of Part 1910—Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
Appendix B to Subpart T of Part 1910—Guidelines for Scientific Diving
Appendix C to Subpart T of Part 1910—Alternative Conditions Under § 1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)

Subparts U-Y [Reserved]

1910.901-1910.999    [Reserved]

Subpart Z—TOXIC AND HAZARDOUS SUBSTANCES

Sec.
1910.1000    Air contaminants.
1910.1001    Asbestos.
1910.1002    Coal tar pitch volatiles; interpretation of term.
1910.1003    13 Carcinogens (4-Nitrobiphenyl, etc.).
1910.1004    alpha-Naphthylamine.
1910.1005    [Reserved]
1910.1006    Methyl chloromethyl ether.
1910.1007    3,′-Dichlorobenzidine (and its salts).
1910.1008    bis-Chloromethyl ether.
1910.1009    beta-Naphthylamine.
1910.1010    Benzidine.
1910.1011    4-Aminodiphenyl.
1910.1012    Ethyleneimine.
1910.1013    beta-Propiolactone.
1910.1014    2-Acetylaminofluorene.
1910.1015    4-Dimethylaminoazobenzene.
1910.1016    N-Nitrosodimethylamine.
1910.1017    Vinyl chloride.
1910.1018    Inorganic arsenic.
1910.1020    Access to employee exposure and medical records.
1910.1024    xxx
1910.1025    Lead.
1910.1026    Chromium (VI).
1910.1027    Cadmium.
1910.1028    Benzene.
1910.1029    Coke oven emissions.
1910.1030    Bloodborne pathogens.
1910.1043    Cotton dust.
1910.1044    1,2-dibromo-3-chloropropane.
1910.1045    Acrylonitrile.
1910.1047    Ethylene oxide.
1910.1048    Formaldehyde.
1910.1050    Methylenedianiline.
1910.1051    1,3-Butadiene.
1910.1052    Methylene chloride.
1910.1053    Respirable crystalline silica.
1910.1096    Ionizing radiation.
1910.1200    Hazard communication.
1910.1201    Retention of DOT markings, placards and labels.
1910.1450    Occupational exposure to hazardous chemicals in laboratories.
1910.1451-1910.1499    [Reserved]

Learn more: https://www.osha.gov/laws-regs/regulations/standardnumber/1910

---